Information required when ordering shaper cutters
2021-08-27 11:21:59
jiangxingTools
2119
Information required when ordering shaper cutters
1, Quantity of shaper cutter
2, Type of cutter - Disc, Shank or Hub with
3, Bore diameter or type of shank fitting required.
4, Pitch - (DP, CP or Module)
5, Pressure Angle.
6, PCD - Approximate pitch circle diameter or number of teeth.
7, Material.
8, Coating.
9, Complete geara or detailed component drawings should be supplied when ordering non-standard gear shaping tools.
相關(guān)文章
-
RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35
RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35Material：HSS M2, M35, M42, S3... - ?PA30° PCD 38mm Shank Type Gear Shaper Cutter with Module m1.75~m4
- PM-HSS ASP2052 for Shaper Cutter and Gear Hob Cutter
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m10
- STD Involute Spline Hob Cutter with Profile DIN 5480
- Information required when ordering gear hobs
