Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
2333
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
HSS M35, M2E Gear Hob Cutter with Module
HSS M35, M2E Gear Hob Cutter with Modulegear tools module m1-m20standards: DIN 3972, DIN867, &n... - Nominal PCD 180mm M2.75 Gear Shaving Cutter with PA20°
- Straight Sided Spline Hob
- Timing Pulley Hob for S.T.D XL(5.08)
- Gear hobs with protuberance for involute gear froms
- PA20° Pre-shaving Gear Cuter Hob with Module m4.25
- PA20° PCD 180mm β15° Disk Type Gear Shavng Cutter with Module m1.25~m6
