Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
2163
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關文章
-
Standard Keyway for Hobs
Standard Keyway for Hobsbore diameter of gear hobs: 22mm--keyway is 6mmbore diameter of gear hobs: 2... - Timing Pulley Hob for S.T.D XH(22.225)
- High Speed Dry Cutting Hob with Carbide K44+AP
- PA30° DIN5480 Involute Spline Gear Hob with Module m1.5
- Effect of Hob Sharpening Errors
- Complete Spline Data for Ordering Straight Spline Hobs
- PA20° Standard Involute Gear Milling Cutter with Module m0.8
